MISUBISHI三菱缝纫机中国代理店

上海青木实业发展有限公司

MITSUBISHI BRAND
INDUSTRIAL SEWING MACHINE BROCHURE & PARTS CATALOG

请点击具体型号查看：

MOTOR		PARTS CATALOG
G SERVO MOTOR	XL-GXXX-XXX, XC-G554-XX-XX
F SERVO MOTOR	XL-XXX-XXX, XC-FXXX-XX-XX

◆三菱ブランド

CHANGES FOR THE BETTER MITSUBISHI INDUSTRIAL SEWING MACHINE AC SERVO LIMISERVO X G SERIES NEW MITSUBISHI LIMISERVO G SERIES! COMPACT, LIGHTWEIGHT MOTOR WITH COMPLETE RANGE OF CONVENIENT FUNCTIONS! REALIZATION OF COMPACT, LIGHTWEIGHT MOTOR MOTOR SIZE REDUCED BY APPROXIMATELY 60% WHEN COMPARED WITH PREVIOUS MOTOR(XL-554). MOTOR WEIGHT REDUCED BY APPROXIMATELY 1.7KG. STEP SEQUENCE FUNCTION THIS FUNCTION ENABLES EASY PROGRAMMING OF THE DESIRED INPUT, OUTPUT AND MACHINING OPERATIONS IN SEQUENCE WITH THE STITCHING PROCESS. (EXTENSIVE UPGRADE OF EXISTING MACHINE SIMPLE SEQUENCE MODE) VARIOUS OPERATIONS CAN NOW BE INCORPORATED INTO THE “STITCHING PROCESS”, INCLUDING THOSE PERFORMED BEFORE AND AFTER OPERATION. DIRECT PARAMETER NO. CALL-UP FUNCTION PREVIOUSLY IT WAS NECESSARY TO SELECT THE RESPECTIVE MODE TO PERFORM SETTINGS WHEN MAKING CHANGES TO THE PARAMETERS, HOWEVER, BY USING THE G10 OR G500 CONTROL PANEL, IT IS NOW POSSIBLE TO CALL UP THE REQUIRED PARAMETER IN A SINGLE OPERATION. IT IS ALSO POSSIBLE TO CALL UP PARAMETERS FOR EACH MODE. COMPUTER INTERFACE STANDARD EQUIPMENT SETTINGS DATA CONTROL INCLUDING BATCH WRITING, READING AND SAVING OF SETTINGS CAN BE PERFORMED USING THE SETUP SOFTWARE. (XCG_SET) STEP SEQUENCE CREATION, EDITING, ETC. CAN BE PERFORMED USING THE DEDICATED STEP SEQUENCE SOFTWARE. (XCG_STEP) FULL FUNCTIONALITY THE G SERIES RETAINS ALL THE OPERABILITY AND MULTI-FUNCTIONALITY OF THE XC-F SERIES! THE CONTROL BOX USES THE SAME CONNECTORS AS THE XC-F SERIES, ENABLING EASY CONNECTION. THE SETTINGS DATA SAVE FUNCTION HAS BEEN EXPANDED TO ENABLE SAVING OF SETTINGS DATA FROM 1 MODEL TO 2 MODELS. A PARAMETER CHANGE DIFFERENCE DISPLAY HAS BEEN ADDED. (A FLASHING DOT(.) DISPLAYS AT THE CHANGED PARAMETER.) 2 TYPES OF FUNCTION SETTING CAN NOW BE PERFORMED WITH A SINGLE INPUT. INTERCHANGEABILITY THE XC-KE-01P DETECTOR, XC-FM-2, SC-FM-3 (LS2-1380 ONLY), AND LE-FA PRESSER FOOT LIFTER UNITS, AND XC-CVS-2 VARIABLE SPEED PEDAL CAN ALL BE USED AS IS. THE XL-554 MOTOR CAN BE USED WITH AN OPTIONAL ATTACHMENT BRACKET. CONTROL PANEL XC-G10 AND XC-G500 SERIES CONTROL PANELS ARE AVAILABLE. THE EXISTING OPERATION PANEL CAN BE ATTACHED TO AND REMOVED FROM THE XC-G10 SERIES CONTROL PANEL. SIGNIFICANT ENHANCEMENTS HAVE BEEN MADE TO THE OPERABILITY OF THE XC-G500 SERIES CONTROL PANEL OVER EXISTING FUNCTIONALITY (XC-E500), AND THE SETTINGS DATA MEMORY HAS BEEN DOUBLED. Control panel XC-G10S(control box attachment type)(Impossible to use it together) XC-G10L(Impossible to use it together) XC-G500-Y (Impossible to use it together) Auto presser foot lifter unit XC-FM-2:Electromagnetic type (24V) XC-FM-3:LS2-1380 only LE-FA:Air type (Shared30V/24Vuse) Variable speed pedal XC-CVS-2:3-speed pedal,standing machine Lever unit (separated type) XC-GL-1-SET:1-step kick-back use(installation plate,extension cable set) (separated type) XC-GL-1-SET:2-step kick-back use(installation plate,extension cable set) Extension cables 1.0m motor cable (200V):K14M52158002 0.6m detector cable:K14M717324830 1.0m encorder cable:K14M71725402 Installation metal fittings new motor and old control box: K14M72354001 old motor and new control box:K14M72354101 CONTROL BOX Model Output Power suppy Functions Single phase XC-GMFY-10-05 550W Single-phase 100 to 120V "Full functionality including auto thread trimming,presser foot litting, fixed-stitch stitcing,continuous stitching and backtaing. Equipped with step sequence,simple sequence and computer communication functions (when connected to control panel).Equipped with 8 solenoid drive outputs, 2 electromagnetic valve outputs,1 small-signal output and 14 input terminals including a variable voltage input" XC-GMFY-20-05 550W Three/single-phase 200 to 240V MOTOR model Power supply output Tapered shaft Phase Voltage XL-G554-10Y Single-phase 100 to 120V 550W Tapered shaft XL-G554-20Y Three/single-phase 200 to 240V 550W Tapered shaft Note:Please refer to the instruction manual for details of the connection method. SUPPORT FOR EACH MACHINE COMPATIBILITY SETTINGS TABLE FOR ADAPTED MACHINES Adapted Machines XC-GMFY Function/Model Lock sittching ◎ Overlock ○ Chain stitching ○ Cross stitching ○ Whipstitching ○ ○NEEDLE POSITIONER FUNCTION: ◎THREAD TRIM FUNCTION. DIMENSIONS SPECIFICATIONS POWER SUPPLY 100V to 120V 200V to 240V MOTOR MODEL XL-554-10Y XL-554-20Y CONTROL BOX MODEL XC-GMFY-10-05 XC-GMFY-20-05 RATED OUTPUT 550W RATED SPEED 3,600RPM RATED TORQUE 1.47N・M(0.15kg・M) SPEED CONTROL RANGE 70RPM TO 8,999RPM MACHINE AXIS SHIPPING SETTING(250RPM TO 4,000RPM) MOTOR AXIS 50RPM TO 3,600RPM DETECTOR XC-KE-01P ENVIRONMENT AMBIENT TEMPERATURE 5℃ to 40℃ AMBIENT HUMIDITY 30%RH TO 95%RH(NO CONDENSATION) MAX. ALTITUDE ABOVE SEA-LEVEL 1,000M WEIGHT MOTOR:6.9KG(NET),9.1(GROSS) CONTROL BOX:3.5KG(NET),6.9KG(GROSS) PACKAGING STYLE L:490MM X W:402MM X H:227MM"CARTON BOX"(WHEN MOTOR AND CONTROL BOX ARE PACKAGED AS SET)

MITSUBISHI 缝纫机

三菱ミシン

MITSUBISHI آلة الخياطة

MITSUBISHI швейной машины

미쯔비시 재봉틀

MITSUBISHI máquina de coser

MITSUBISHI dikiş makinesi

MITSUBISHI máy may

MITSUBISHI 縫紉機